Installing The Top Anchors; Marking The Bottom Anchor Holes; Drilling The Bottom Anchor Holes - Prolitec AirQ 380 Original Instructions Manual

Step 4 – Installing the Top Anchors
Set the mounting bracket aside. Use an electric drill to make a 1/8" hole at the exact location you
marked. This will serve as a guide for the anchors. Use a hammer to tap the anchors in far enough
so they stay well in position. Then screw them straight into the drywall. Avoid screwing them in at an
angle.
HINT: If you use an electric drill with a Phillips driver
head, make sure the head fits the anchor perfectly, as
the anchor or screw can strip easily. Set the drill to a
slow rotation.
Step 5 – Marking the Bottom Anchor Holes
Now you can mark the holes for the bottom anchors using the mounting bracket as a template. Hold
the mounting bracket in place and screw the flat-head screws half way into the top anchors. This will
prevent the bracket from moving. Now use the pointy tool to mark the location for the two bottom
anchors. Unscrew the top screws and set the bracket aside.
Step 6 – Drilling the Bottom Anchor Holes
Drill a 1/8" hole as the guide for the anchors at the exact spot you have marked. Hammer the
anchors in just enough to set them in place, then screw them in straight.
AirQ 380/580 Installation
5
13