Control.ini
!i: Event related to the remote inputs 1-16
Example:
!i1c → if input 1 is activated (c=close).
!i1o → if input 1 is deactivated (o=open).
!i1t → if input 1 changes (t=toggle).
!k: Event related to the infrared remote control
Example:
!k1c → if the key 1 of the infrared remote control is activated
(c=close)
In combination with the infrared remote control only the
event "close" is available, which means "key pressed".
!t: Time events
The internal timer of the clock starts counting with zero
seconds, zero minutes and zero hours at the moment the device
is powered up. With insertion of the microSD-card, this clock is
66
also set to "0" zero.
Each time value must be entered in the format
minutes:seconds. Hours must be converted to minutes. A time of
2 hours, 15 minutes and 20 seconds should be formatted as
135:20.