Wemc-1 Procommander Back; Pin Assignment For Open-Collector Circuit - WEIGL ProCommander LTC Instruction Manual

ProCommander LTC pin assignments
If the joystick is pressed during the start of the device the
basis-bootloader will be started. In the first row of the display 12
bars will be shown. You can make a firmware-update with the
batch-file. Further information you can find here 6.4 Firmware
18

3.2 WEMC-1 ProCommander BACK

update via batch-file.

3.2.1 Pin assignment for Open-Collector Circuit

POWER
The ProCommander LTC can be operated with voltages of
12V.