Fcc And Ce Compliance; Fcc Instruction To User - WEIGL ProCommander LTC Instruction Manual

1.1 FCC and CE Compliance

Weigl ProCommander's LTC have been tested to comply with
FCC and CE requirements.
The ProCommander LTC is low voltage DC devices and
therefore, neither UL nor CE require safety testing. For
fireproofing or additional radio frequency interference shielding,
the ProCommander LTC can be rack mounted in a 19" rack space

1.2 FCC Instruction to User

with optional hardware.
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

reconnect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Important Information and Safety Tips
9