Yamaha O2R96 Service Manual page 35

4. Rear Assembly U
(Time required: About 15 minutes)
4-1. Remove the SP02R96. (See procedure 1.)
4-2. Remove the MB02R96. (See procedure 2.)
4-3. Fasten the control panel assembly. (See procedure 3.)
4-4. Remove the two (2) screws marked [30A] and the five
(5) screws marked [30B]. (Fig.2)
4-5. Lift the rear assembly U from the rear side and fasten
them by the two (2) rear stays. (There are two ways
of using the rear stays shown in the photo 4 or 5.)
Front stay
Photo.3
<Left side view>
Side panel L
[30]: Bind Head Tapping Screw-B
[70]: Bind Head Tapping Screw-B
Control panel assembly
<Rear view>
<Top view>
[30A]
[70A]
<Front view>
[70B]
Rear assembly U
Rear stay
Photo.4
[30B]
[70C]
Control panel assembly
A4.0X8 MFZN2BL (VC688800)
A4.0X8 MFZN2BL (VC688800)
Fig.2
Photo.5
Rear assembly U
<Right side view>
[30A]
[70A]
Side panel R
Bottom assembly
02R96
35