stuck. – Fig. 37.
7. Do not pour water or food directly into the appliance. If you
inadvertently immerse your appliance in water or spill water directly
on the heating element (when the pot is not in place), take it to your
service center for repair.
8. Change the sealing gasket every 2 years.
TECHNICAL TROUBLESHOOTING GUIDE
Problem
Unable to open lid
Unable to close lid
Food is uncooked.
Possible reasons
Unable to open because of
pressure in the cooking pot.
Pressure in the pot is fully
released but the float valve is
stuck because it is too dirty,
and therefore unable to fall.
Hot pot with steam inside.
The float valve is stuck
because it is too dirty, and
therefore unable to fall.
Direction at which lid was
closed is incorrect.
Rice : water ratio is incorrect.
No electricity from the
power grid.
Solutions
Wait for the pressure in the
pot to be completely released
automatically.
a. Once the product has cooled
down, press the external part
of the float valve – Fig. 36.
b. For next use, please clean
and wipe the float valve
– Fig. 35.
Wait for the pot to be cool.
a. Once the product has cooled
down, press the external part
of the float valve – Fig. 36.
b. For next use, please clean
and wipe the float valve
– Fig. 35.
Close lid in the correct
direction according to the
instruction manual.
Use the required rice : water
ratio.
Check the electric circuit.
EN
23
Need help?
Do you have a question about the HOME CHEF Smart Pro and is the answer not in the manual?