In This Service Guide - Keysight Technologies InfiniiVision 6000 X Series Service Manual

In This Service Guide

This book provides the service information for the Keysight 6000 X-Series
oscilloscopes. This manual is divided into these chapters:
1 Characteristics and Specifications
This chapter contains a partial list of characteristics and specifications for the
Keysight InfiniiVision 6000 X-Series oscilloscopes.
2 Testing Performance
This chapter explains how to verify correct oscilloscope operation and perform
tests to ensure that the oscilloscope meets the performance specifications.
3 Calibrating and Adjusting
This chapter explains how to adjust the oscilloscope for optimum operating
performance.
4 Troubleshooting
This chapter begins with suggestions for solving general problems that you may
encounter with the oscilloscope. Procedures for troubleshooting the oscilloscope
follow the problem solving suggestions.
5 Replacing Assemblies
This chapter describes how to remove assemblies from the 6000 X-Series
oscilloscope.
6 Replaceable Parts
This chapter describes how to order replaceable assemblies and parts for the
Keysight 6000 X-Series oscilloscopes. It includes diagrams and parts lists for
hardware that you can order.
7 Safety Information
At the front of the book you will find safety notice descriptions and document
warranties.
6000 X-Series Oscilloscopes Service Guide 3