To Remove The Front Bezel Assembly; Figure 33 Removing The Bezel - Keysight Technologies InfiniiVision 6000 X Series Service Manual

5
Replacing Assemblies

To remove the front bezel assembly

1 Remove the bezel from the front deck.
Figure 33
100
The bezel is secured to front deck by molded-in retaining clips located around
the perimeter of the bezel. Gently pry these outward (either by hand or using a
flat head screwdriver). Working your way around the bezel releasing the clips
gently.
Removing the bezel
6000 X-Series Oscilloscopes Service Guide