Internal Wiring Between The Ups System Cabinet And The Power Modules - Delta Ultron DPM Series User Manual

5.4.3 Internal Wiring between the UPS System Cabinet
and the Power Modules
1
Open the UPS system cabinet's two front doors (
(Front View of the UPS System Cabinet with Two Front Doors Open)
Open the Two Front Doors
1
(Figure 5-22: Location of the UPS System Cabinet's Internal Panels)
NOTE:
If you want to modify the UPS from dual input into single input, please
use the socket wrench to reinstall the three copper bars.
EMERG
POWER ENCY OFF
emergency Don't operate ! unless
in
) and remove all internal panels (
1
1000/ 1250kW
Remove the Panels
2
5-25
5 Installation and Wiring
RS-232 PARALLEL
TEMPERATURE DETECTION EXTERNAL BATT. OUTPUT/INPUT DRY CONTACT REPO BATT. START
SMART SLOT PM EXTERNAL BREAKER DETECTION
PARALLEL
PM SYS SWITCH DISPLAY
SYS
BYPASS BREAKER OUTPUT BREAKER BATTERY BREAKER EXTERNAL BATT. TEMP. DETECTION OUTPUT DRY CONTACT INPUT DRY CONTACT REPO
NO NC COM NO NC COM NO COM B1 G1 B3 G3 OD1 OD1 OD3 OD3 OD5 OD5 ID1 G1 NC COM NO COM
NO NC COM NO NC COM NC COM B2 G2 B4 G4 OD2 OD2 OD4 OD4 OD6 OD6 ID2 G2 NC COM NO COM
MANUAL BYPASS BREAKER INPUT BREAKER BATTERY FUSE EPO
).
2
SCR Panel
PCB Panels
Wiring Panel