Connections & Settings; Connecting The E5Cc - Omron E5CC Quick Start Instruction

Quick Start Instruction E5CC
1. Connections & Settings
This chapter discusses the basic settings and connections. Before
contacting the help desk, please be sure to go through these.

1.1 Connecting the E5CC

A connection diagram is displayed on the side of each controller. (See Figure 1.)
The picture below is an example, the type you purchased may deviate from this.
Most connections and numbers are identical, however.
Figure 1: Connection diagram.
Clamps 1 - 2 are the control output for heating / cooling unit
Clamps 4 - 5 - 6 are for the sensor, such as thermocouple or Pt100
Clamps 7 - 8 - 9 - 10 are the alarm / help connections
Clamps 11 - 12 are the power voltage CAUTION! 24V or 100-240V
Clamps 13 through 18 are for options
OMRON
5