Name & Function Of Operation Parts; Names And Components Of Each Part; Function Key - Rcom INSECT MAX 70 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Name & Function of Operation Parts
조작부의 명칭과 기능
⑤
●

Names and components of each part

Heater Operation Lamp
①
: Light on when working
Temp. Display
②
: Current Temperature Display
Humidity Display
③
: Current Humidity Display
Pumping System Operation Lamp
④
: Light on when working
Insect MAX 70 is available to automatic humidity raise only, if you want to control low humidity level,
please adjust "Air Controlling Lever" by manual [refer to page 13]
● Function Key
Function
Dispaly
Default Setting
DIGITAL INCUBATOR
1. Introduction
①
⑥
Setting Mode: Press two buttons at the same time to go to Setting Mode.
Select Menu / Quick Movement / Cancellation / Setting value check during incubation
Value + / APS is forced to operate if press 5sec. / APS is forced to operate for 2min. if press 10sec.
Value - / Factory Initialization
Press buttons at the same time to go to setting mode.
Temp.
tEP
35.0℃
Insect Incubator Rcom Max 70 User Manual
② ③
⑦ ⑧
Power Failure Alarm Function (FND light)
⑤
: Light on when power failure (Cancel Button : OK)
Up Button
⑥
: Setting Temp. & Humidity UP
Down Button
⑦
: Setting Temp. & Humidity DOWN
Menu Selecting Button
⑧
: Setting Value check
Abnormal high
Humidity
temp. alarm
rH HI
60% 2℃
(4) Name & Function of
Operation Parts
④
Abnormal low
Centigrade / Fahrenheit
temp. alarm
LO ℃ / ℉
-3℃
℃
7