Mark Explanation; Table Of Contents - Rcom INSECT MAX 70 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Contents
How to Use Rcom Insect MAX 70
1. Introduction
(1) Rcom Insect 70 Introduction
(2) Safety Precautions
(3) Identification of Parts and Composition
(4) Name & Function of Operation Parts
2. Before use
(1) What's an Incubation Room?
(2) How to Assemble Main Body
(3) APS Assembly / Speed Control / Tube Replacement/ Storage and Cleaning
(4) Humidity & Air Maintenance During Incubation / Dew Condensation
3. Incubation
(1) Incubator Installation
(2) Incubation start / Incubation Termination
4. Function Settings
(1) Incubator Initialization / Return to Factory Setting
(2) Temperature & Humidity Setting / How to Set Abnormal High & Low Temp. Alarm
(3) How to change Centigrade & Fahrenheit / Work Automatic Pumping System by Force
5. Management
(1) How to Disassemble and Clean the Incubator
6. Product Information
(1) How to Replace the Fuse
(2) Troubleshooting
(3) Specification
Successful hatching depends on many numbers of factors. Neither Autoelex (Rcom) nor its global
distributors and vendors can be held responsible for loss of life or property damage caused by user
neglect, alteration, modification or painting, change of use or power failure. To avoid errors, mishaps
and danger, carefully check this User Manual before initial use. Also please check the manual regularly
to ensure your operation of the machine is correct.
2
Caution : Caution mark against a fault that can cause damage, trouble, or failure of incubation.
Prohibited.
Do not disassemble.
Do not touch.
Tip : References or useful suggestions in using Rcom product
Warning of actions which may be dangerous or cause damage to the incubator.
Insect Incubator Rcom Max 70 User Manual
3 ~ 7
8 ~ 13
14 ~ 16
16 ~ 19
20 ~ 21
22 ~ 24

Mark Explanation

It is necessary to keep.
Remove the power cord from outlet.
Ground Connection for preventing electric shock.
Introduction
Before use
Incubation
Function Settings
Management
Product Information
DIGITAL INCUBATOR