Temperature Setting; Humidity Setting - Rcom INSECT MAX 70 User Manual

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com

Temperature Setting

Function Key
Function
Dispaly
Default Setting
▶ Press
will be indicated for about 0.5sec. and then temp display
will blink.
▶ Then, you can adjust temperature with
and
▶ After setting required temperature, press
once then setting will be stored.
Next, "rH" will indicated in humidity display for about 0.5
sec. and then humidity display will blink.
※ Just press

Humidity Setting

▶ From the temperature setting, press
"rH" (Humidity) will be displayed for 0.5 second and humidity
display will blink.
▶ When humidity display is blinking, adjust humidity setting
with
▶ After setting required humidity, press
then setting will be stored. Next, "HI" will be indicated for
about 0.5sec.
※ Just press
setting.
Insect MAX 70 is available to automatic humidity raise only, if you want to control low humidity level,
please adjust "Air Controlling Lever" by manual [refer to page 13]
The temperature and humidity level is optimized according to the international standard at the time of ship
ping. It could be recalibrated by the user if the user wishes to do so, but this is not recommended.
When in need of adjustment, please refer to our homepage (www.Rcom.co.kr → Information → User Manual
Category) or contact the place of purchase. Commercially available thermometer and hygrometers may have
drastic measurement deviations, so it is recommended to use thermometer and hygrometer designated for
this purpose. [Designated Thermometer and hygrometer – Refer to Rcom Homepage]
DIGITAL INCUBATOR
4. Function Settings
Temp.
tEP
35.0℃
and button at the same time then " tEP "
button. [Default setting: 35℃ (95℉)]
button if you do not need to change setting.
or button. [Default setting : RH 45%]
button if you do not need to change
Insect Incubator Rcom Max 70 User Manual
Abnormal high
Humidity
temp. alarm
rH HI
60% 2℃
button
button once and
button once
(2) Temperature Setting&Humidity Setting /
How to Set Abnormal High Temp. Alarm
Abnormal low
Centigrade / Fahrenheit
temp. alarm
LO ℃ / ℉
-3℃
℃
Step 1
Step 2
Step 3
Step 4
17