Installing Cables - Huawei PowerCube 500 Quick Manual

8

Installing Cables

NOTE
Route inter-device cables through the pole.
8.1 Installing Ground Cables for Modules
1. Connect ground cables between the function module and lithium batteries.
Function module
Pole ground bar
Installing Cables for the Maintenance Compartment
8.2
Cable Hole Diameter Requirements
Installation Procedure
1. Push up the sunshade
until the spring fastener
is stuck gently.
Lithium battery
No.
1
2
3
4
5
6
2. Open the maintenance
compartment.
2. Connect the other end of the module
Lithium battery
Module ground cable
Cable Hole Silk Screen
GE1 - GE2
GE3/P&E(++) - GE7 /P&E(++) P&E network cable
GE8/DI
DO
12VDC
24VAC
3. Install cables for P&E cameras.
NOTE
Cables for the dome
camera can only be
connected to the
P&E(++) ports.
Dome camera 1
5
ground cable to the pole ground bar.
Cable Outer
Cable Type
Optical fiber
6.8±0.3 mm
-
Dome camera alarm
linkage cable
Bullet camera power cable
9.3±0.4 mm
Dome camera power cable
Dome camera 2
Bullet camera 1 Bullet camera 2
Diameter