Huawei PowerCube 500 Quick Manual page 4

2. Install the pole
1. Use a positioning
mounting kit.
sticker to mark the
installation position for
the pole mounting kit.
Positioning
sticker
Cable hole
3. Install the function module
hanging kit.
6. Install a lithium battery.
NOTE
 Ensure that the arrow on the top of the pole mounting kit points exactly to the middle
point on the top of the positioning sticker.

There are three types of bolts available for installing the pole mounting kit. Choose
the appropriate type of bolts based on the pole diameter.
Pole Diameter
(105–140 mm)
Bolt (120 mm)
4. Install a function module.
7. (Optional) Install the second lithium battery.
NOTE
If two lithium
batteries are required,
install one above the
other. Install the pole
mounting kit after
using a positioning
sticker at the cable
hole in the upper part
of the pole to mark its
installation position.
For the method, see
steps 1 and 2.
4
Pole Diameter Pole Diameter
(140–175 mm) (175–210 mm)
Bolt (160 mm)
5. Install the lithium battery hanging kit.
Bolt
(190 mm)