Huawei PowerCube 500 Quick Manual page 10

Logging In to the Web Server
12.2
1. Use a mobile phone or laptop to search for devices by
searching for WIFI. (Set the laptop to automatically obtain
IP, even after the WIFI will automatically assign an IP
address.)
2. Use the browser to enter the NE default IP address,
access the Web Server login page, and enter the values
of User Name, Password, and Verification Code.
3. Click Login.
NOTE
 Default network element (NE) IP address: 192.168.1.1.
 Default user name: szhw. Default password: Changeme_123.
12.3 Changing an NE ID
1. Choose Configuration > NE Attribute from the Function Tree.
2. Enter the name of the NE in the Name field.
3. Click Apply.
12.4
Changing the NE IP Address
During site commissioning, the IP address of the gateway NE needs to be configured in compliance with the external DCN requirements but
other non-gateway NEs use IP addresses that are automatically generated based on NE IDs.
1. Choose Communication > Communication Parameters from the Function Tree.
2. Configure the communication parameters of the NE.
3. Click Refresh.
NOTE
 Do not use the default NE IP address to access the public network (such as Internet).
 The default NE IP address is a temporary address, and is only used for management DCN plug-and-play. The IP address must be
modified in a timely manner.
NOTE
Default WIFI
name: RMn-******.
Default password:
Modify_123.
10