Ltech T4 Manual page 2

LTECH
6 Remote Control instructions:
Built-in two control programs, it is convenient for user's different habits and place, free switching the two programs.
P
W
:
Sync control P ress the key and
over 2 seconds.
*
Power Saving: unmanned operation more than 1 min on the remote, the remote will automatically shut down to realize
zero loss, extending operation life. Press ON/OFF again, it will restart the remote.
Mode keys : Switch black/red/green/blue/yellow/purple/cyan/white/RGB/RGBYPCW
Open the buzzer: long press
A Sync Program: .
-
Touch Full color Circle
Sync Status Indicator Light
Speed Keys
(Keep pressing to adjust
brightness continuously)
ode
M Keys
Switch Key for
P
Changing Modes
(Skipping/Smooth /Strop )
P
W
W
White light Key
(Press to turn on/off the white LEDs.
-
Long press to adjust white LEDs)
Scene mode
Keys
P
) to
3 Short press "P" key exit color selection.
)
4 press to switch the selected colors' skipping, smooth and strobe (Brightness/Speed adjustment).
) the edited
5 Long press any key in 1-8 to save
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD.
T4 LED RGBW Controller Manual
P W
:
Zone control P ress the key
over 2 seconds.
Close the buzzer: long press
The Usage of The Programming "P" :
) P
1 Long press the key in 2 seconds, buzzer sounds,
enter the programming mode.
) :
2 Color selection Saved 8 colors in NO. 1-8, press
NO. in order and press MODE or color circle
again to select the color.
(color will be saved in this key automatically).
Brightness Keys
1 2 3 4 5
(Keep pressing to adjust
Example : 1
Red Green Blue Yellow Purple
brightness continuously)
7 Colors' Skipping/Smooth/Strobe
R G B Y P C W
Programming Key
1 2 3 4 5
Example : 2
Red Blue Black Black Black
R B 2 Colors' Skipping/Smooth/Strobe
1 2 3 4 5
Example : 3
/ Red Black Green Black Blue
On Off
R BK G BK B 5 Colors' Skipping/Smooth/Strobe
1 2 3 4
Example4:
Black Red Black Green Black
USB Charge Port
R G B 3 Colors' Fade out and fade in
BK R BK G BK B 6 Colors' Skipping/Strobe
Note: Select Black color with keys
scene.
3
WWW.LTECHONLINE.COM
LTECH
B. Zone Program:
and
Zoning Instructions
Select single zone: Press keys 1-8 on the remote.
Select multiple zones : press continuously in multiple keys from 1-8 on the remote.
Close the zone: short press the zone-selection key, then short press the ON/OFF
Open the zone: touch the color circle
The Usage of The Programming "P" :
6 7 8
)
1 Long press the key
Cyan White Black
)
2 Color selection Saved 8 colors in NO. 1-8, press NO.
6 7 8
select the color color will
Black Black Black
1
Example : 1
Red
6 7 8
Black Black Black
R G B Y P C W
5 6 7 8
Example : 2
Red
Blue Black Black
R B
Note : b
Select lack color
)
3 Short press "P" key
)
4 Press to switch the selected colors' skipping, smooth and strobe (Brightness/Speed adjustment).
5) OK, completed scene editing short press P to play the scene.
Tel: +86 756 620 8823
-
Touch Full color Circle
Speed Keys
(Keep pressing to adjust
brightness continuously)
ode
M Keys
Switch Key for
Changing Modes
P W
(Skipping/Strop/Smooth)
(Press to turn on or off the white LEDs.
Long press to adjust white LEDs)
Zone-selection Keys
：
or press any key to open the current zone.
P
in 2 seconds, buzzer sounds, enter the programming mode.
:
( be ).
saved in this key automatically
2 3 4 5 6 7 8
Example : 3
Green Blue Yellow Purple Cyan White Black
7 Colors' Skipping/Smooth/Strobe
1 2 3 4 5 6 7 8
Example4:
Blue Black Black Black Black Black Black
R G B
2 Colors' Skipping/Smooth/Strobe
BK R BK G BK B
with keys
P
to
exit color selection.
, " "
4
Fax: +86 756 620 8833
T4 LED RGBW Controller Manual
Sync Status Indicator Light
Brightness Keys
(Keep pressing to adjust
brightness continuously)
P
Programming Key
W
White light Key
/
On Off
USB Charge Port
to close the zone.
in order and press MODE or color circle again to
1 2 3 4 5 6 7 8
Red Black Green Black Blue Black Black Black
R BK G BK B 5 Colors' Skipping/Smooth/Strobe
1 2 3 4 5 6 7 8
Black Red Black Green Black Blue Black Black
3 Colors' Fade out and fade in
6 Colors' Skipping/Strobe
LT@LTECHONLINE.COM