Figure 65 Solar Setting Interface
Step 4: Set on-grid capacity, storage
capacity and number of PV strings
(MPPT number).
Figure 67 SOC Calibration Interface
Step 6: Check SOC Calibration function
set No.
Figure 69 Grid Setting Interface
Step 8: Click the Grid Function to set up
relevant parameters about the grid
Figure 71 System Mode Setting Interface
Step 10: Click Function-System Mode to
set system mode: DC, AC, Hybrid.
___________________________________________________________________
Step 5: Click the Battery Function and
check battery type MA1-BAT.
Step 7:
function set No. If you only use the
inverter without battery, please set it Yes.
Figure 70 Max. Feed in rate Setting Interface
Step 9: Set the Max. Feed in rate value.
Figure 72 Work Mode Setting Interface
Step 11: Click the mode then set up work
mode.(self-use or force time charge)
United Renewable Energy Co., Ltd.
Figure 66 Battery Model Interface
Figure 68 Battery Ready Interface
Check
the
Battery
Ready
Page 39 of 45