Fein BSS 1.6E Repair Instructions page 9

BSS 1.6E, BSS 1.6CE
6. Disassembly
Separating the motor and gearbox
1
2
1. Unscrew the two cylinder head screws (1).
2. Remove the shear head (2).
3. Unscrew the four screws (3).
4. Remove the intermediate flange with armature (4).
5. Remove the air guide ring (5).
C-SC_CSSM Version 1.0
3
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
4
5
Tool:
- 4mm hex key
- Torx T15
Page 9 of 33