Assembly - Fein BSS 1.6E Repair Instructions

BSS 1.6E, BSS 1.6CE

7. Assembly

Assembling the tool head (BSS 1.6E)
1
1. Install the two circlips (1) on both sides using a small screwdriver.
2. Attach the two cutting jaws (2) and tighten with two screws (3) each [4.5 Nm].
3. Attach the cutter blade (4).
4. Push the bolts (5) into the gearbox head.
C-SC_CSSM Version 1.0
4
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
5
3
2
Tool:
- Slotted screwdriver
- 2.5mm hex key
Page 17 of 33