Fein BSS 1.6E Repair Instructions page 13

BSS 1.6E, BSS 1.6CE
6. Disassembly
Disassembling the gearbox
3
2
1
1. Remove the two cylinder head screws (1).
2. Remove the leaf springs (2).
3. Remove the eccentric shaft (3).
4. Remove the two shims (4 and 6) and the roller (5) from the eccentric shaft.
5. Remove the grooved ball bearing (7) with a drawing-off socket cap from the eccentric shaft.
6. Unscrew the tool head (9) from the housing (8).
C-SC_CSSM Version 1.0
6
5
4
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
7
8
9
Tool:
- 4mm hex key
- Drawing-off socket cap
16mm chuck cone
Page 13 of 33