Fein BSS 1.6E Repair Instructions page 19

BSS 1.6E, BSS 1.6CE
7. Assembly
Assembling the tool head (BSS 1.6CE)
2 3
1
1. Attach the two cutting jaws (1).
2. Install the chip clipper (2).
3. Secure the chip clipper (2) and the cutting jaws (1) with two socket head screws (3) on each of the two sides
[4.5 Nm].
C-SC_CSSM Version 1.0 2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Tool:
- 2.5mm hex key
Page 19 of 33