Fein BSS 1.6E Repair Instructions page 18

BSS 1.6E, BSS 1.6CE
7. Assembly
Assembling the gearbox (BSS 1.6E)
1
1. Press the grooved ball bearing (1) onto the eccentric shaft.
2. Slide the shim [h = 1.5mm] (2), the needle bearing (3) and the shim [h = 0.15mm] (4) onto the eccentric
shaft.
3. Place the tool head (5) onto the housing (6).
4. Insert the eccentric shaft (7) into the housing.
5. Place the leaf spring into the housing and fasten using the two socket head screws (9).
 Tighten socket head screws (9) to a torque of 8 Nm.
6. Fill 12 g of grease into the gearbox housing.
C-SC_CSSM Version 1.0
2
3
4
2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
6 5
7
8
9
Tool:
- 4mm hex key
- Arbor press
- Sleeve with ø6mm
interior
- Grease
(0 40 101 0100 4)
Page 18 of 33