BSS 1.6E, BSS 1.6CE
6. Disassembly
Disassembling the motor
1. Pull the plug.
2. Remove the three screws (1) and take off the cover (2).
3. Unscrew the brush holder (3).
4. Unscrew the cable clamping piece (4).
5. Unplug the screw connections between the motor and electronics.
6. Remove the electronics (5).
7. Disconnect the supply cable (6).
C-SC_CSSM
Version 1.0
2
2013-07-18
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
1
5
3
6
4
Tool:
- Phillips head
screwdriver
- Torx T15
Page 8 of 33