Fein BSS 1.6E Repair Instructions page 20

BSS 1.6E, BSS 1.6CE
7. Assembly
Assembling the tool head (BSS 1.6CE)
1
1. Fasten the screw (1) into the tool head from the top [left-handed thread].
 Set the knurled screw height to 8.6mm.
2. Place the spiral spring (3) onto the shift fork.
3. Push the two parts into the tool head from below and screw them into the knurled screw.
 Only screw in the shift fork far enough so that the bolt (4) can be inserted into the tool head.
4. Insert the bolt (4) into the tool head and secure it on both sides with a circlip (5).
5. Screw the set screw (6) into the tool head.
 Only screw it in far enough so that the shift fork can no longer be removed.
C-SC_CSSM Version 1.0 2013-07-18 All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
6
4
3
2 5
Tool:
- Slotted screwdriver
- 2mm hex key
Page 20 of 33