H3C SecPath Series Operation Manual page 8

Operation Manual – User Access
H3C SecPath Series Security Products
III. Configuring the local to be authenticated by the peer using PAP
Table 1-5 Configure the local to be authenticated by the peer with the PAP approach
Configure PAP username and password
that the local will send when
authenticated by the peer in PAP mode
(in interface view)
Delete the PAP username and
password that the local will send when
authenticated by the peer in PAP mode
(in interface view)
By default, when the local firewall is authenticated by the peer in PAP mode, both the
username and password sent by the local firewall are null.
IV. Configuring the local to be authenticated by the peer using CHAP
Table 1-6 Configure the local to be authenticated by the peer with the CHAP approach
Create a local user and enter the local
user view (system view)
Set a password for the local user in local
user view
Cancel the password for the local user in
local user view
Configure the local name (in interface
view)
Delete the configured local name (in
interface view)
Set the default CHAP authentication
password in interface view (use this
password when the local user name and
password are not configured)
Delete the default CHAP authentication
password in interface view
In the above table, simple means to send password in plain text and cipher in
ciphertext.
Operation
Operation
1-6
Chapter 1 PPP Configuration
Command
ppp pap local-user username
password { simple | cipher } password
undo ppp pap local-user
Command
local-user username
password { simple | cipher }
password
undo password
ppp chap user username
undo ppp chap user
ppp chap password { simple | cipher }
password
undo ppp chap password