Subscribe to Our Youtube Channel
Related Manuals for H3C SE-S5130 Series
Summary of Contents for H3C SE-S5130 Series
- Page 1 H3C SE-S5130 Switch Series Hardware Information and Specifications New H3C Technologies Co., Ltd. http://www.h3c.com Document version: 6W100-20230821...
- Page 2 The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Command Conventions
Preface H3C SE-S5130 Switch Series Hardware Information and Specifications describes product models, technical specifications, ports,and LEDs of the S6520X-EI & S6520X-HI switches. This preface includes the following topics about the documentation: • Audience. • Conventions. • Documentation feedback. Audience This documentation is intended for: •... -
Page 4: Network Topology Icons
Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software. An alert that calls attention to essential information. -
Page 5: Documentation Feedback
Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments. -
Page 6: Table Of Contents
Contents Product models and technical specifications ·················································· 1 Product models ·················································································································································· 1 Technical specifications ····································································································································· 1 Chassis views ································································································ 3 SE-S5130 switch series ····································································································································· 3 SE-S5130-10S ··········································································································································· 3 SE-S5130-18S ··········································································································································· 4 Ports and LEDs ····························································································· 4 Ports ··································································································································································· 4 Console port ··············································································································································· 4 10/100/1000BASE-T autosensing Ethernet port ························································································... -
Page 7: Product Models And Technical Specifications
LS-SE-S5130-10S SE-S5130 switch series SE-S5130-18S LS-SE-S5130-18S NOTE • To obtain the purchase information, see the data sheet for the switch at https://www.h3c.com/en/Products_and_Solutions/InterConnect/Switches/ and pay attention to the switch lifecycle management announcement at https://www.h3c.com/en/Support/Policy_Dynamics/Management_Strategy/Products_End_of_Lif e_Announcement/Switches/. • For information about switch and software compatibility, see the release notes. - Page 8 Power input AC input • Rated voltage 100 VAC to 240 VAC @ 50 or 60 Hz Power specifications • Max voltage 90 VAC to 264 VAC @ 47 to 63 Hz Power consumption Static power consumption 11 W 12 W (Unloaded) Typical power consumption...
-
Page 9: Chassis Views
Humidity 5% RH to 95% RH, noncondensing Compliance • Safety standards • EMC standards Product compliance • Environmental protection and eco-friendly standards Chassis views SE-S5130 switch series SE-S5130-10S Figure 1 SE-S5130-10S front panel (1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port status LED (3) SFP+ port status LED (4) System status LED (SYS) (5) Console port... -
Page 10: Se-S5130-18S
SE-S5130-18S Figure 3 SE-S5130-18S front panel (1) 10/100/1000BASE-T autosensing Ethernet port (2) 10/100/1000BASE-T autosensing Ethernet port status LED (3) SFP+ port status LED (4) System status LED (5) Console port (6) SFP+ port Figure 4 SE-S5130-18S rear panel (1) AC-input power receptacle (2) Grounding screw Ports and LEDs Ports... -
Page 11: 10/100/1000Base-T Autosensing Ethernet Port
10/100/1000BASE-T autosensing Ethernet port Table 4 10/100/1000BASE-T autosensing Ethernet port specifications Item Specification Port name 10/100/1000BASE-T autosensing Ethernet port Switch models that provide a 10/100/1000BASE-T autosensing All switch models Ethernet port Connector type RJ-45 The 10/100/1000BASE-T autosensing Ethernet ports are mainly Description used for transmitting and receiving 1000/100/10 Mbps copper port services... - Page 12 Table 6 GE SFP transceiver modules and cables GE SFP transceiver Central Modal Interface Interface module waveleng bandwidth transmission connector cable model and (MHz*km) distance cable SFP transceiver modules Twisted pair SFP-GE-T RJ-45 100 m (328.08 ft) cable Twisted pair SFP-GE-T-D RJ-45 100 m (328.08 ft)
- Page 13 GE SFP transceiver Central Modal Interface Interface module waveleng bandwidth transmission connector cable model and (MHz*km) distance cable TX: 1490 SFP-GE-LH70- 9/125 µm, SMF 70 km (43.50 miles) SM1490-BIDI RX: 1550 TX: 1550 SFP-GE-LH70- 9/125 µm, SMF 70 km (43.50 miles) SM1550-BIDI RX: 490 SFP cables...
- Page 14 • As a best practice, use H3C transceiver modules and cables for the switch. • The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff.
-
Page 15: Leds
LEDs System status LED The system status LED shows the operating status of the switch. Table 8 System status LED description LED mark Status Description Steady green The switch has started up correctly. Flashing green The switch is performing power-on self test (POST). Steady red The switch has failed POST or the switch is faulty.
Need help?
Do you have a question about the SE-S5130 Series and is the answer not in the manual?
Questions and answers