Dimensions; Mounting Options - Honeywell SPM Flex User Manual

SPM Flex Gas Detector

Dimensions

12.3 in. (31.2 cm)
Figure 19. Dimensions of the detector

Mounting options

CAUTION
!
The SPM Flex detector must be installed only by qualified professional
personnel in accordance with local codes�
The SPM Flex gas detector has an optional mounting bracket assembly that is
easily affixed to a suitable vertical surface such as a wall, tool housing, mounting
plate on a pole etc�
Two mounting bracket options are available for fixed detectors: The standard
kit is for typical/new applications in which the detector is to be mounted to, for
example, a wall� A second option, a retrofit mounting, is a plate to be used when
replacing a Honeywell Analytics SPM detector with the SPM Flex detector�
Mount the detector with at least two appropriate fasteners (e�g�, concrete screws
when mounting on concrete, etc�)� The fastener combination must be capable of
securely holding four times the detector's weight, approximately 40 lbs (18�2 kg)�
When mounting the detector on sheetrock, the fasteners must be attached to studs�
28
13.2 in.
(33.6 cm)
7.2 in.
(18.3 cm)
9.5 in.
(24.1 cm)
6.4 in.
(16.3 cm)