Menu Map - Honeywell SPM Flex User Manual

SPM Flex Gas Detector

Menu Map

Main Menu
Reset Alarms & Faults
Change Chemcassette
The detector's menus are easily navigated� As an example, this is how a user
could review the detector's gas settings when starting from the In Monitor screen:
1. Press the Up Arrow to open the Main Menu.
2. Press the Down Arrow 4 times to highlight the Review Mode option.
3. Press the Accept/Select button to enter Review Mode.
4. Press the Up Arrow or Down Arrow until the Gas settings option is highlighted.
5. Press the Accept/Select button to display the Gas Summary.
To return to the detector to the In Monitor display, press the Power/Cancel button
three times to back out of the Main Menu options�
16
Login/Logout
Silence
Reset all
audio alarm
Monitor Mode
Enter Out of
monitor mode monitor mode
Review Mode
Event Chem-
cassette
History Settings
Maintenance
4-20 mA
Flow Char-
Inhibit Current Loop
acterization
Calibration
Setup
General
Monitoring Latching
Test
Optics
Force
Simulation
Verification
Relay
Power Off
Gas Output
Additional
Network
State
Status
Update
Open/Close
Program
Gate
Outputs Network Security
Force
4-20 mA
Software
Trend/Plot
Configuration
Manager