Turning The Detector On And Off - Honeywell SPM Flex User Manual

Turning the detector on and off

Press and hold the Power/Cancel button until the green LED begins blinking� The
detector will begin a startup sequence that lasts about 30 seconds�
The four LEDs provide at-a-glance information about the current state of the
detector:
Figure 5. SPM Flex LEDs
LED
solid
Red
blinking
Green blinking
solid
Yellow
blinking
Blue solid
To turn the detector off, press and hold the Power/Cancel button for 5 seconds
or select "Power Off" from the menu� Leave the detector off at least 30 seconds
before turning it on again�
LEDs (red, green, yellow, blue)
Description
Alarm 1
Alarm 2
The detector is active
Maintenance fault
Instrument fault
Connected to external power
SPM Flex Gas Detector
15