Figure 32.
Location of the pump assembly
6. Cut and remove the three wire ties from the bundle containing the pump wires. Take
care not to damage any of the wires.
wire guides (2)
Figure 33.
Pump wiring.
7. Remove the wire bundles from the guides around the stepper motor.
8. Remove the pump from the case.
Area of detail
pump
pump bracket
screws (3)
red and grey wires
stepper motor
wire ties (3)
SPM Flex Gas Detector
pump
wire
intake/exhaust
guides (2)
tubing to
manifold
stepper
motor
pump
pump
bracket
manifold
connector
55