Table of Contents
Advertisement
ioLogik R2140 User's Manual
Menu Items
File
From the File menu, you can export the list of I/O servers that are currently displayed in the
navigation panel. You also can import a list of I/O servers into ioAdmin.
When importing a server list, you will be prompted to select which servers on the list need to be
imported.
The file will have a .SLT extension and can be opened as a text file. The server list will provide the
following information for each server:
server name
module type
IP address
unit ID
System
Several operations are possible from the System menu.
Auto Scan Active Ethernet I/O Server will search for ioLogik servers on the network. When
connecting for the first time or recovering from a network disconnection, you can use this
command to find I/O servers that are on the network.
Network Interface allows you to select a network to use, if the PC has multiple network adapters
installed.
I/O Status Refresh Rate is used to adjust how often the I/O server is polled for device status. The
current rate is displayed on the status bar at the bottom of the window. Note that higher sync rates
result in higher loads on the network.
TCP Socket Timeout Interval allows you to select the preferred timeout value for TCP socket
communication.
3-7
Using ioAdmin
Advertisement
Table of Contents
