Related Manuals for Atmel AT18F-DK3
Summary of Contents for Atmel AT18F-DK3
- Page 1 Atmel AT18F-DK3 Configurator Development Kit ........................User Guide 3685A–CNFG–04/08...
-
Page 2: Table Of Contents
2.1.10 Power Supply Jack and Power Supply Header ........... 2-6 2.1.11 JTAG ISP Connector and TDO Selection Jumper..........2-6 Socket Adapter Board...................... 2-10 Atmel CPLD ISP Download Cable ................... 2-10 Section 3 Schematic Diagrams ....................3-1 AT18F-DK3 Configurator Development Kit User Guide... -
Page 3: Introduction
AT18F Series of FPGA configuration memories (Configurators). This kit provides designers an easy way to develop, prototype and evaluate new designs using the Atmel AT18F devices. The AT18F Series JTAG ISP Configurator includes devices in four different densities – AT18F010-30XU (1M), AT18F002- 30XU (2M), AT18F040-30XU (4M), and AT18F080-30XU (7M). -
Page 4: Jtag Isp Download Cable
Socket Adapter Board is used with the ATF15xx-DK3 Base Board. 1.2.2 JTAG ISP Download Cable JTAG ISP Download Cable (Atmel JTAG ISP MV Cable V6.0) for PC Parallel Printer (LPT) Port 1.2.3 JTAG Configurator Programming System (JCPS) Software Atmel JCPS software can be downloaded from Atmel web site at: –... -
Page 5: Jcps References
Help Files – from the JCPS software main window, click on HELP and then select HELP FILE. Tutorials – from the JCPS software main window, click on HELP, and then select JCPS TUTORIAL. Technical Support For technical support on any Atmel Configurator-related issue, please contact Atmel Configurator Appli- cations Group at: http://www.atmel.com/dyn/products/support.asp On-line Support Request Form: http://www.atmel.com/dyn/products/faq.asp?Faq=y... -
Page 6: Hardware Description
Socket Adapter Board Power LED Clock Selector Power Switch Configuration Oscillator I/O Pin Headers Power Supply Jack Power Supply Header Device Socket JTAG Cascade Jumper JTAG ISP Header LEDs LEDs Jumpers Push-button Jumpers Push-button Switches AT18F-DK3 Configurator Development Kit User Guide 3685A–CNFG–04/08... -
Page 7: 7-Segment Displays With Selectable Jumpers
The 7-segment Displays with Selectable Jumpers are available on the ATF15xx-DK3 Base Board of the AT18F-DK3 kit. However, these components were designed for other Atmel adapter boards such us the ATF15xx Series CPLDs, and they are not intended to be used with ATF15xxDK3-SAX20 socket adapter for AT18F Series Configurators. -
Page 8: Leds With Selectable Jumpers
2.1.2 LEDs with Selectable Jumpers The LEDs with selectable jumpers are available on the ATF15xx-DK3 Base Board of the AT18F-DK3 kit. However, these components were designed for other Atmel adapter boards such us the ATF15xx Series CPLDs and they are not intended to be used with ATF15xxDK3-SAX20 socket adapter for AT18F Series Configurators. -
Page 9: Push-Button Switches With Selectable Jumpers For I/O Pins
ATF15xx-DK3 Base Board of the AT18F-DK3 kit. However, these components were designed for other Atmel adapter boards such us the ATF15xx Series CPLDs and they are not intended to be use with ATF15xxDK3-SAX20 socket adapter for AT18F Series Configurators. Therefore, there is no detailed description about these components in this user guide, if you need additional infor- mation, see the ATF15xx-DK3 Kit user guide. -
Page 10: Mhz Oscillator And Clock Selection Jumper
The VCCIO and VCCINT Voltage Selection Jumpers, labeled VCCIO Selector and VCCINT Selector, respectively on ATF15xx-DK3 Base Board of the AT18F-DK3 kit are used to select voltage supply to the device and to the JTAG connector. VCCIO voltage is used to set the I/O interface voltage (VCCO) and JTAG programming voltage (VCCJ) of the AT18F Series Configurator. -
Page 11: Iccio And Iccint Jumpers
The Power Supply Switch, labeled POWER SWITCH, can be switched to the ON or OFF position, which is used to turn on or off the power of the ATF15xx-DK3 Base Board of the AT18F-DK3 kit. It allows the 9V DC voltage at the Power Supply Jack to pass to the voltage regulators when it is in the ON position. - Page 12 Hardware Description To create a JTAG daisy chain using multiple ATF15xx-DK3 Base Boards of the AT18F-DK3 kits, the TDO Selection Jumper, labeled JP-TDO, must be set to the appropriate position. For all the devices in the daisy chain except the last device, this jumper must be set to the “TO NEXT DEVICE” position. For the last device in the chain, this jumper must be set to the “TO ISP CABLE”...
- Page 13 PC. The four JTAG signals are generated by the LPT port and they are buffered by the ISP download cable before going into the ATF15xx-DK3 Base Board of the AT18F-DK3 kit. The pinout for the 10-pin JTAG Port Header on the ATF15xx-DK3 Base Board is shown in...
- Page 14 2. Pitch = 0.0787 inches = 2.00 mm The ISP cable converter that is included in AT18F-DK3 kit can be used to convert the Atmel 10-pin JTAG ISP header with 2.54 mm pitch to a 14-pin JTAG ISP header with 2.0 mm pitch.
-
Page 15: Socket Adapter Board
(LPT) port of your PC to the 10-pin JTAG header on the Atmel ATF15xx- DK3 Base Board of the AT18F-DK3 kit or a custom circuit board. This ISP cable acts as a buffer to buffer the JTAG signals between the PC’s LPT port and the ATF18 Series device on the circuit board. The Power-On LED on the back of the 25-pin male connector housing indicates that the cable is connected properly. - Page 16 Color Stripe Note: Your circuit board must supply VCC and GND to the Atmel CPLD ISP Cable through the 10-pin male header. When programming AT18F Series Configurator, VCCIO is used for the ISP Cable AT18F-DK3 Configurator Development Kit User Guide 2-11 3685A–CNFG–04/08...
- Page 17 For in-system programming of the AT18F Series Configurator on customer’s target board, the 10-pin ISP header (2.54 mm or 1.0-inch pitch) from Atmel JTAG ISP Cable v6.0 or later version can be directly con- nected to the target board as shown in...
-
Page 18: Schematic Diagrams
Section 3 Schematic Diagrams AT18F-DK3 Configurator Development Kit User Guide 3685A–CNFG–04/08... - Page 19 Schematic Diagrams Figure 3-1. Schematic Diagram of ATF15xx-DK3 Base Board AT18F-DK3 Configurator Development Kit User Guide 3685A–CNFG–04/08...
- Page 20 Schematic Diagrams Figure 3-2. Schematic Diagram of ATF15xxDK3-SAX20 (20-lead TSSOP) Adapter Board AT18F-DK3 Configurator Development Kit User Guide 3685A–CNFG–04/08...
- Page 21 Schematic Diagrams Figure 3-3. Schematic Diagram of ISP Cable Converter AT18F-DK3 Configurator Development Kit User Guide 3685A–CNFG–04/08...
- Page 22 Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI- TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY...
- Page 23 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Atmel AT18F-DK3...