Completion Check - Sony UP-DF750 Setup And User's Manual

Completion Check

After the setup procedure is completed, perform the
following steps to verify that the settings have been
correctly implemented.
1
Connect the UP-DF750 to the network.
2
Turn power to the UP-DF750 on.
3
Mount a tray with blue thermal film loaded.
4
Send image data from the modality.
If the unit has been set up correctly, printing starts.
If printing does not start, the image data have not reached
the printer. This means that the network settings are
incorrect.
Check the IP address and other network settings of the
unit, and also verify that the correct settings are being used
at the modality side.
64
Setting the IP Address