Preparation
Supplied Accessories
The unit is packed together with the following accessories.
Check that nothing is missing from your package.
Output tray (1)
Cleaning kit (1)
Output tray stopper (1)
Film tray size adapter kit (1)
CD-ROM (Instructions for Use disk) (1)
Before Using this Imager (1)
Service Contact List (1)
Notes
• Retain the original carton and packing materials in case
you have to transport the unit in the future.
• The output tray stopper and film tray size adapter kit will
be required when the tray size is to be changed later.
Store these items carefully.
14
Supplied Accessories
Removing the Packing Materials
Before using the unit for the first time, be sure to remove
the packing materials from inside the unit and film trays.
1
Open the top cover and inner cover (page 50), and
remove the packing materials from inside the unit.
2
Pull out film tray 1, and remove the tray cover.
3
Remove the packing material, and place the cover
back onto the tray.
4
Repeat steps 2 and 3 for film tray 2.
5
Place film trays 1 and 2 back into the unit.
Notes
• Failure to remove the packing materials from the unit
will result in film jams.
• If you turn on the unit without removing the packing
materials from inside the film trays, a "Check Tray"
error will occur.