Selecting A Gamma Curve - Sony UP-DF750 Setup And User's Manual

To reset to the default status
To cancel density adjustment by "Full Range
Calibration" and reset density to the default, proceed
as follows.
1 Press the F or f button to move the cursor to
"Calibration Reset," and press the g button.
2 Press the F or f button to move the cursor to the
blue thermal film for which you want to restore
the default setting.
3 Press the EXEC button.
The density setting of the selected blue thermal
film is reset to the default. The LCD panel
indication changes as follows.
4 Press the MENU button.
The menu screen closes and the unit returns to the
standard screen.
34
Menu Operation
To reset another type of blue thermal film
to the default status
Repeat steps 1 to 4.

Selecting a Gamma Curve

If the gamma curve has not been specified at the modality
side, the gamma curve selected at the unit will be used for
printing. In this case, the gamma curve can be selected
separately for each blue thermal film.
1,7 2,3
5 4
1
Press the MENU button to bring up the menu screen.
2
Press the F or f button to move the cursor to "Default
Gamma," and press the g button.
A screen for specifying the blue thermal film type
appears.