Sony UP-DF750 Setup And User's Manual page 21

2
Open the film tray cover by putting your fingers in the
grooves on both sides of film tray 1, and pulling it
upward in the direction of the arrow.
Pull it upward in the direction of the arrow,
putting your fingers in the grooves.
Note
If the old printing surface protection sheet remains in
film tray 1, remove it.
3
Remove the damp-proof bag from the carton.
4
Open the damp-proof bag by tearing at the pre-cut
tabs.
Note
Remove the seal after loading the film into film tray 1.
If you remove it before loading, the film sheets may
slip and drop.
Seal used to grasp the film sheets
21
Loading Film Sheets