Other Settings - Sony UP-DF750 Setup And User's Manual

Note
If any film other than UPT-M710BL/M712BL film is
loaded in the film tray when printing a quality control
pattern, "-- -- --" appears and printing cannot be
performed.
5
Press the EXEC button.
The pattern selected in step 3 is printed.
When printing is completed, one of the following
screens appears, depending on which pattern was
selected.
Quality Control pattern was selected
For details on the displayed density list, refer to
"Mammography Quality Control Guide."
SMPTE pattern was selected
Press the MENU button to close the menu screen and
return to the standard screen.

Other Settings

The following settings can be changed, but not by using the
menu. However, you cannot change the following settings
by yourself. To change the following settings, contact your
Sony dealer.
Item
Making the buzzer sound when error
messages such as Set Film, Remove
Prints and so on, are displayed.
Reversing the printouts horizontally.
Attaching the L and R marks on each
printout.
Printing caption on the top and
bottom of the black frame.
Changing the gamma curve of USER
2 to USER 20.
Default setting
Off (No buzzer)
Off (Do not reverse the
printouts.)
Off (Do not attach L and R
marks.)
On (Captions are printed.
However, if the content of
the caption is not
configured, the captions
will not be printed.)
For USER 2 to USER 5:
Each gamma curve has
been preset to the proper
settings based on the
SONY 1 gamma curve.
For USER 6 to USER 20:
The same setting as the
one of SONY 1 is applied.
39
Other Settings