Powering Up The Board; Figure 1: Everest Board - Arrow Everest-CortexM1-SFP+Loop-Demo User Manual

Arrow Central Europe GmbH
User Guide

Figure 1: Everest Board

2.5

Powering up the Board

Insert the Finisar Optical Transceiver into the J1 connector (SFP+ module cage). A loop has
to be built by connecting the transmitter with the receiver with an optical fiber cable. The
Everest DEV Board is powered up using the 12 V DC jack. For programming connect it
although with your computer using USB mini B connector J9.
page 9
Everest-CortexM1-Demo