Notes On Connecting/Disconnecting Cables - Fujitsu PRIMERGY CX420 S1 Operating Manual

Dual node cluster server
Hide thumbs Also See for PRIMERGY CX420 S1:
Table of Contents

Advertisement

Hardware installation
5.5

Notes on connecting/disconnecting cables

V
CAUTION!
Always read the documentation supplied with the device you wish to
connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always take hold of the
cable by the plug.
Follow the sequence described below to connect or disconnect external
devices to or from the Dual Node Cluster Server:
Be sure to wait for 10 seconds or more after shutdown before turning the
Dual Node Cluster Server on.
Connecting cables
Ê Turn off all power and equipment switches.
Ê Disconnect all power plugs from the properly grounded power outlets.
Ê Connect all cables to the Dual Node Cluster Server and peripherals.
Ê Plug all data communication cables into the utility sockets.
Ê Plug all power cords into the properly grounded power outlets.
Disconnecting cables
Ê Turn off all power and equipment switches.
Ê Disconnect all power plugs from the properly grounded power outlets.
Ê Unplug all data communication cables from the utility sockets.
Ê Disconnect the relevant cables from the Dual Node Cluster Server and all
the peripherals.
I
For connecting or disconnecting LAN cables, the Dual Node Cluster
Server does not need to be powered off. To avoid loss of data teaming
function has to be enabled.
42
Operating Manual
CX420 S1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents