Fujitsu PRIMERGY CX420 S1 Operating Manual page 46

Dual node cluster server
Hide thumbs Also See for PRIMERGY CX420 S1:
Table of Contents

Advertisement

Starting up and operation
Indicators
Power-on indicator (green)
Lights up green when the Dual Node Cluster Server is switched
ON.
Flashes green if the server node has been switched on and is in
an error state.
ID
ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
Buttons
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
ID
ID button
Lights up (blue) on the front and on the rear of the server when the
ID button is pressed. Both ID indicators are synchronized.
46
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the multi-node server
system from the mains voltage. To disconnect from the
mains completely, remove the power plug(s).
Operating Manual
CX420 S1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents