Fujitsu PRIMERGY CX420 S1 Operating Manual page 51

Dual node cluster server
Hide thumbs Also See for PRIMERGY CX420 S1:
Table of Contents

Advertisement

– After power failure
The server node automatically reboots following a power failure (depending
on the settings in the BIOS or in BMC).
– Power-on indicator override
The server node can be switched off (hard power off) by holding down the
On/Off button (approximately 4 - 5 seconds).
V
CAUTION!
There is a risk that data may be lost.
– BMC
BMC offers various options for switching the server node on and off, e.g. via
the Power On Off page of the BMC Web interface.
V
CAUTION when turning the power off
(Windows Server 2008)!
The operation of the power switch can be specified as "Do Nothing", "Ask
me what to do" (only for Windows Server 2003), "Stand by", "Hibernate",
and "Shutdown" depending on the OS settings. The default is
"Shutdown".
On the server node, functions corresponding to "Stand by" and
"Hibernate" are not supported as BIOS and hardware functions.
For details about operating mode settings, refer to the manual supplied
with the OS.
CX420 S1
Operating Manual
Starting up and operation
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents