Installation Steps, Overview - Fujitsu PRIMERGY CX420 S1 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your Dual
Node Cluster Server. Links take you to sections where you can find more
detailed information about the respective steps:
Ê First of all, carefully read the safety instructions in
page 21.
Ê Transport the Dual Node Cluster Server to the place where you want to set
it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
page 36).
Ê Make sure that you have all necessary manuals (see
overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the Dual Node Cluster Server. For mounting refer to the original
component documentation.
Ê Mount the Dual Node Cluster Server into the rack (see
the Dual Node Cluster Server in/from the rack" on page
Ê Wire the Dual Node Cluster Server. Follow the instructions in sections
"Installing a server node to the Dual Node Cluster Server" on page 39
"Notes on connecting/disconnecting cables" on page
Ê Connect the Dual Node Cluster Server to the mains (see section
"Connecting the Dual Node Cluster Server to the mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the Dual Node Cluster Server (see section
page 45).
CX420 S1
"Unpacking the Dual Node Cluster Server" on
8); print out the PDF files if required.
Operating Manual
"Important information" on
"Documentation
"Installing/removing
37).
42.
"Controls and indicators" on
and
40).
19