Important Statement - MicroStep SH-HC30 User Manual

Model SH-HC30 height controller for flame/pla sma cutting torch is simple and easy to use,
convenient to commission and modest in price. In addition,
all
products--good product performance at modest price. It is an ideal accessory
Microstep
to
match welding or cutting equipment.

1.2 Important statement:

In case of any discrepancy between Model SH-HC30 height controller
for flame/plasma cutt ing torch and the contents of this manual, the
actual product should be referred to.
accessories are
visit our website at
or simply call Beijing Microstep Control Technology Co., Ltd.
Be sure to read the safety warnings and precautions carefully to avoid
any accidents due to incorrect operations.
Please st rict ly follo w the detailed inst ructions in t he manual before
inst alling and using this machine.
In case that Model SH-HC30 height controller for fla me/plasma
cutting torch and/or this manual is illegally used, the user shall be
liable for all t he aft ermaths and Microstep will take no lega l liability,
for it doesn't represent Microstep's position.
The safety warnings are used to prevent any damage to human body
or properties.
In case of any qualit y problem found in using this product, please call
the service center of the manufacturer or aut horized agents or
dist ributors to get service and help.
It's not allowed to duplicate, distribute or utilize any cont ent of this
manual without a written permi ssion from the right owner. Anyone
调高器说明书
Any amendments of the product or its
For updated contents, please
subject to change without prior notic e.
http://www.startsh.com/eng
the sell points of
it insists