Maintenance
>
Resetting the Number of Scans After Regular Cleaning
13. On the Scanner Maintenance screen, select Roller Cleaning.
14. Pull the lever to open the scanner cover.
The scanner enters roller cleaning mode.
15. Slowly rotate the rollers at the bottom by tapping anywhere on the LCD. Wipe the surface of the rollers using a
genuine Epson cleaning kit or a soft cloth dampened with water. Repeat this until the rollers are clean.
Caution:
!
Be careful not to get your hands or hair caught in the mechanism when operating the roller. This could cause an
injury.
16. Close the scanner cover.
The scanner exits roller cleaning mode.
Related Information
"Cleaning Kit Codes" on page 22
&
"Roller Codes" on page 21
&
Resetting the Number of Scans After Regular Cleaning
Reset the number of scans using the control panel after regular cleaning.
1. Select Scanner Maintenance from the home screen.
99