Scanner Basics
>
Part Names and Functions
Part Names and Functions
Front
A
Feed selector
B
Control Panel
C
Edge guides
D
Input tray
E
Input tray extension
F
ADF (Automatic Document Feeder)
G
Output tray
H
Output tray extension
I
Stopper
The selector to change the feeding method of originals. Change
the position of the feed selector according to the type of originals
to be scanned.
Indicates the scanner's status and allows you to specify scanning
settings.
Feeds originals straight into the scanner. While holding the tab,
slide the edge guides to fit both ends of the originals.
Place to load originals. Pull out the input tray extension according
to the length of the originals.
Feeds loaded originals automatically.
Holds originals ejected from the scanner. Pull out the output tray
extension according to the length of the originals.
Prevents ejected originals from falling off the tray extension. Adjust
the position of it according to the length of the originals.
13