Table of Contents
Advertisement
Maintenance
>
Replacing the Roller
2. On the Scanner Maintenance screen, select Regular Cleaning.
3. Tap Reset the Number of Scans.
4. Tap Yes.
Note:
You can also reset the number of scans by using the following method.
Select Settings and then Device Information. Tap the
Replacing the Roller
The Pickup Roller and the Separation Roller need to be replaced when the number of scans exceeds the life cycle of
the rollers. When a replacement message is displayed on the control panel or your computer screen, follow the
steps below to replace it.
A: Separation Roller, B: Pickup Roller
1. Press the
P
button to turn off the scanner.
2. Unplug the AC adapter from the scanner.
icon and tap Number of Scans After Regular Cleaning.
100
Advertisement
Table of Contents
