Table of Contents
Advertisement
Placing Originals
>
Placing Envelopes
Note:
❏ Select the appropriate rotation angle in the Rotate setting, or select Auto Rotation (or Auto) in the application for
scanning.
❏ To scan envelopes, specify the necessary settings in the Epson Scan 2 window.
Open the Epson Scan 2 window. Select the Main Settings tab > Detect Double Feed > Off in this order. See the Epson
Scan 2 help for details.
When Detect Double Feed in the Epson Scan 2 window is enabled and a double feed error occurs, remove the envelope
from the ADF and reload it. On the control panel, set DFDS Function to On to disable Detect Double Feed for only the
next scan, and then scan again. DFDS Function disables Detect Double Feed for only one envelope. See Document
Capture Pro help on how to specify the settings of Epson Scan 2 from Document Capture Pro.
This section explains how to place the originals when the paper feeding mode is in Normal Feed as an example.
1. Set the feed selector to
2. Pull out the output tray extension and raise the stopper.
3. While holding the tab, slide the edge guides all the way out.
Placing Envelopes
(Normal Feed).
46
Advertisement
Table of Contents
