Table of Contents
Advertisement
Solving Problems
Paper Feeding Problems
Multiple Originals Are Fed
If multiple originals are fed, open the scanner cover and remove the originals. Next, close the scanner cover.
If multiple originals are fed frequently, try the following.
❏ If you load unsupported originals, the scanner may feed multiple originals at a time.
❏ Make sure the feed selector is correctly selected.
❏ Clean the rollers inside the scanner.
❏ Reduce the number of originals being placed at a time.
❏ Select Slow on the control panel to slow down the scanning speed.
❏ Use Automatic Feeding Mode in Epson Scan 2, and scan originals one by one.
❏ When you are using Document Capture Pro, see the Document Capture Pro help for details.
Related Information
"Cleaning Inside the Scanner" on page 95
&
"Scanning with Manual Feed in Automatic Feeding Mode" on page 82
&
Removing Jammed Originals from the Scanner
If an original has jammed inside the scanner, follow these steps to remove it.
1. Remove all originals remaining in the input tray.
2. Pull the lever and open the scanner cover.
>
Paper Feeding Problems
>
Removing Jammed Originals from the Scanner
112
Advertisement
Table of Contents
