Resetting The Number Of Scans After Cleaning Inside The Scanner; Replacing The Roller Assembly Kit - Epson ES-C380W User Manual

Maintenance
>

Replacing the Roller Assembly Kit

Related Information
"Cleaning Kit Codes" on page 41
&
"Replacing the Roller Assembly Kit" on page 182
&

Resetting the Number of Scans After Cleaning Inside the Scanner

After performing regular cleaning, reset the scan number on the control panel or by using the Epson Scan 2 Utility.
This section explains how to reset using the control panel.
1. Tap Scanner Maintenance on the home screen.
2. Tap Regular Cleaning.
3. Tap Reset the Number of Scans.
4. Tap Yes.
Note:
To reset from the Epson Scan 2 Utility, start the Epson Scan 2 Utility, click the Maintenance tab, and then click Reset in
Regular Cleaning. If you cannot click Reset, select Regular Cleaning Alert.

Replacing the Roller Assembly Kit

The roller assembly kit (the pickup roller and the separation roller) needs to be replaced when the number of scans
exceeds the life cycle of the rollers. When a replacement message is displayed on the control panel or your
computer screen, follow the steps below to replace it.
A: Separation Roller, B: Pickup roller
Note:
Replace the roller assembly kit while the scanner is turned on.
182